Aquaplug
AQUAPLUG is a rapid-setting cement compound used to stop flowing water in concrete water-retaining structures. AQUAPLUG sets within 1-2 minutes.
Description
Application
- stops soaking water caused by water pressure
- stops flowing water through holes and cracks in concrete and masonry surfaces
- seals around pipes, conduits and ducts
- typical areas of application include dams, tunnels, cellars, basements, reservoirs, garages, etc
Advantages
- easy-to-use – just add water
- sets within 1-2 minutes
- expands on setting
- durable
- frost and salt resistant
Packaging
Supplied in 5 and 20 kg buckets
Direction how to use
- the surface must be clean and free of dust or plaster
- never mix more product than can be used in 2 minutes
- wet surface to be treated before application
- wearing latex gloves, add clean water to a small amount of AQUAPLUG and mix to the consistency of a putty
- plug the material into the opening and hold firmly in place until the product has hardened
Properties
Colour | grey/brown |
Application temperature | +5 DEG C |
Setting time | + 60 seconds |
Trafficable | after 5 minutes |
Loading | after 1 hour |
Tools | rubber gloves/pointing trowel |
Flash point | non-flammable |
Storage life | 1 year |
Performance Results
AGE | COMPRESSIVE STRENGTH | EXPANSION WET |
(MPA) (ASTM-109) | (ASTMC-157) | |
30 MIN | 5 | N/A |
1 day | 20 | +0,04% |
3 days | 23 | +0,8% |
7 days | 30 | +0,9% |
28 days | 34 | +0,11% |
Reviews
There are no reviews yet.